WS Factory Patek Philippe Aquanaut 5167R & 5168G Full-Weight Edition – 136g / 150g | Super Clone Cal. 26-330

The latest WS Factory Patek Philippe Aquanaut 5167R and 5168G Full-Weight Editions introduce a significantly different approach to heavyweight Aquanaut replicas. Rather than using conventional internal weights or a steel shell containing tungsten inserts, WS Factory describes these models as true full-weight constructions, with high-density tungsten material incorporated as the primary structural material.

The 5167R reaches approximately 136 grams, while the larger 5168G reaches approximately 150 grams. At the same time, WS Factory maintains an impressively slim 8.25mm case thickness, preserving the elegant proportions that define the Aquanaut.

Specifications

• Factory: WS Factory
• Models: Patek Philippe Aquanaut 5167R / 5168G
• Edition: Full-Weight Edition – Not Conventional Internal Weighted Version
• 5167R Weight: Approximately 136g
• 5168G Weight: Approximately 150g
• Case Material: High-Density Precision Tungsten-Based Material
• Claimed Material Density: Approximately 16.8g/cm³
• Construction: Full-Weight Structural Construction
• Movement: Integrated Super Clone Cal. 26-330 Automatic
• Hacking Seconds: Yes
• Movement Decoration: Deep Engraving with Gold-Tone Engraved Details
• Case Thickness: Approximately 8.25mm
• Crystal: Sapphire Crystal
• Strap: Natural FKM Fluoroelastomer Rubber
• Clasp: Calatrava Cross-Style Folding Clasp
• Functions: Hours, Minutes, Central Seconds and Date
• Style: High-Density Full-Weight Aquanaut Super Clone

Full-Weight Construction – Not Simply a Weighted Case

The major selling point of the WS Factory edition is the distinction between “full weight” and conventional “weighted” construction.

Many heavyweight replicas increase mass by inserting tungsten pieces into cavities inside a stainless steel case. Other methods use tungsten-copper alloys, tungsten steel or steel shells containing localized high-density inserts.

WS Factory takes a different approach, using a high-density precision tungsten-based material as part of the structural construction itself.

The objective is not simply to make the watch heavier, but to distribute the mass more naturally throughout the watch head.

5167R – Approximately 136g

The WS Factory Aquanaut 5167R Full-Weight Edition weighs approximately 136 grams.

This gives the watch substantially greater wrist presence than ordinary steel-based replicas while retaining the relatively slim and elegant profile associated with the Aquanaut.

For the 5167R configuration, the exterior can be finished in the appropriate rose gold-tone treatment while the high-density underlying construction provides the additional mass.

5168G – Approximately 150g

The larger Aquanaut 5168G Full-Weight Edition reaches approximately 150 grams.

The increased mass corresponds with the larger case architecture while maintaining the same objective: reproducing the substantial feel associated with a precious-metal watch without relying on a lightweight conventional steel case.

This makes the 5168G particularly notable because the watch combines a significant 150g weight with an approximately 8.25mm case thickness.

High-Density Precision Tungsten Material

WS Factory specifies a density of approximately 16.8g/cm³ for its high-density material, positioning it much closer to the density range associated with precious-metal construction than conventional stainless steel.

According to the factory, this is not the common tungsten-copper or tungsten-steel material frequently used in weighted replicas.

The material is extremely hard and consequently more difficult to machine, resulting in lower manufacturing output and considerably more demanding case production.

Improved Surface Stability

WS Factory also emphasizes the stability of the high-density material and exterior treatment.

The construction is designed to resist oxidation, peeling and deterioration of the surface finish under normal use.

The case can also undergo additional gold-plating treatment when required. WS Factory notes that the factory-applied protective surface coating must first be removed before an additional gold-wrapping or plating process is performed.

For clarity, these versions should be described as high-density tungsten-based replicas with precious-metal-tone finishing, rather than solid rose gold or solid white gold watches.

Ultra-Thin 8.25mm Case

Achieving high weight alone is relatively straightforward if case dimensions are allowed to increase substantially.

The more technically interesting feature of this WS Factory edition is therefore the combination of its heavyweight construction with an approximately 8.25mm case thickness.

The thin profile preserves the refined character of the Aquanaut and allows the watch to sit close to the wrist despite the considerably increased mass.

Integrated Super Clone Cal. 26-330

Inside is an integrated Super Clone Cal. 26-330 automatic movement.

Rather than using an unrelated generic automatic caliber hidden beneath decorative plates, this movement is designed around the architecture and visual presentation of the 26-330 generation.

The bridges feature deep engraving with gold-tone lettering and detailing, improving the movement's appearance when viewed through the caseback.

Functional Hacking Seconds

An important mechanical detail is the hacking-seconds function.

When the crown is pulled into the appropriate time-setting position, the seconds hand stops, allowing the watch to be synchronized more precisely before the crown is returned to its normal position.

This functionality is incorporated into the 26-330 Super Clone movement rather than being merely a cosmetic exterior upgrade.

Sapphire Crystal

The watch uses a high-transparency sapphire crystal, providing excellent clarity while maintaining strong resistance to everyday scratches.

The crystal and thin bezel construction preserve the broad, open appearance of the Aquanaut dial while contributing to the watch's slim overall profile.

Natural FKM Fluoroelastomer Strap

WS Factory pairs these models with a natural FKM fluoroelastomer rubber strap.

FKM is valued for its flexibility, durability and resistance to heat, moisture and everyday environmental exposure. Its soft construction also helps balance the substantial weight of the high-density watch head.

The integrated strap design follows the Aquanaut case closely, maintaining the seamless sports-watch profile associated with the collection.

Calatrava Cross-Style Folding Clasp

The strap is completed by a Calatrava Cross-style folding clasp, maintaining the characteristic Patek Philippe-inspired design.

The folding construction provides a secure fit while allowing the strap to retain a clean appearance when worn.

A Different Approach to Heavyweight Aquanaut Replicas

The WS Factory 5167R and 5168G are notable not simply because they are heavy, but because the additional mass is combined with an unusually slim case.

The 5167R at approximately 136g and 5168G at approximately 150g, together with the 8.25mm profile, high-density tungsten-based construction and integrated Super Clone Cal. 26-330, represent a more sophisticated approach than conventional replicas that simply place heavy inserts inside an otherwise standard steel case.

The result is intended to provide more natural weight distribution, a substantially heavier wrist feel and the slim proportions expected from the Aquanaut design, while the upgraded 26-330 Super Clone movement adds hacking seconds and refined movement decoration.

If you have any questions, please contact us via
WhatsApp: +84 919 860 459 for the fastest support.
Email: shopitc@gmail.com